Battery Powered Pressure Transducers
The availability of power is limited in remote locations, yet the need for sensors in these areas is not!
In remote applications, the common choice for powering sensors and other instrumentation is battery power. Changing batteries is a costly operation in remote areas, so low power consumption is a key feature when selecting a pressure sensor.
AST has released a new analog voltage output signal to be used with battery powered systems that consumes less than 3mA of current during operation.
This output is 0.5V to 2.5V full scale output, powered with 3-5V of unregulated power, including 3.3V lithium batteries. This excitation range allows the use of these batteries without adding a DC-to-DC converter, which increases power budget efficiency.
Low Power Consumption (<3mA)
Operates from 3-5VDC unregulated
80msec warm up
Available for hazardous areas
In addition to low current consumption, AST's sensors can be "pulsed" on when a reading is needed so there is no need to constantly power the sensor. In approximately 80msec, the pressure sensor can be powered, provide an output signal for data capture, and be de-energized, further enhancing battery life.
The output signal is now available on hazardous and non-hazardous location products, including submersible pressure-based level sensors.
Please contact Aircom for price and availability.